If you’re considering a bathroom remodeling project, it’s important to do your research before you dive in. This will help ensure that you’re choosing a style and materials that are both functional and appealing.

Paint is one of the easiest and least expensive ways to refresh your bathroom’s look. If possible, choose paint with a semi-gloss finish so it’s easy to clean and resistant to mold and mildew.

Install a new vanity

A vanity is an important element in any bathroom; it can greatly affect your space’s functions. If you plan to replace an existing one, consider how much storage you need and your preferred style. Visit https://bathroomsbyrupp.com/ to find more ideas for your bathroom vanity.

A freestanding unit can add an air of lightness and elegance to a small bathroom. At the same time, cabinets with drawers are ideal for storing supplies like extra toilet paper, beauty products and towels. If your space is limited, try a pedestal sink that’s less bulky and allows for an open floor space underneath.

Before installing your new vanity, shut off the water supply valves to the existing sink. First, locate the wall studs where you plan to install the cabinet using a stud finder.

Install a new toilet

Make the most of a cramped space with a wall-mounted toilet. It saves floor space and is easy to clean.

Stuff an old rag into the exposed sewer pipe flange to block odors and prevent tools from falling inside. Also, use a putty knife to scrape off the old wax from the bottom of the flange ring.

Wearing waterproof gloves, loosen and remove the toilet tank bolts with an adjustable wrench. Then, lift the tank off and rest it on a garbage bag or old towel. Position the bowl and affix the new wax ring to the flange ring. Insert the plastic disks and caps over the floor bolts; tighten them by hand to avoid cracking the toilet base.

Install a new sink

If your bathroom sink is old and outdated, it’s time to replace it. Choose a sink that’s the right size for your space. Also, consider installing a new faucet and water supply lines to match the new sink.

Before you install a new sink:

  1. Remove the existing one.
  2. Using channel lock pliers, disconnect the sink tailpiece and drain supply line.
  3. Use a bucket to catch any water that drains out.
  4. Remove the nut from the P-trap section.

Ensure your new sink is at the proper height for people of all abilities. Grab bars should be secured to block between wall studs and placed 33 to 36 inches off the ground.

<iframe src=”https://www.google.com/maps/embed?pb=!1m14!1m8!1m3!1d11229.199244240108!2d-122.856368!3d45.282163!3m2!1i1024!2i768!4f13.1!3m3!1m2!1s0x549569baacd5206b%3A0xd24bf4a89b41f9e7!2sBathrooms%20by%20RUPP!5e0!3m2!1sen!2sus!4v1689923443744!5m2!1sen!2sus” width=”600″ height=”450″ style=”border:0;” allowfullscreen=”” loading=”lazy” referrerpolicy=”no-referrer-when-downgrade”></iframe>

Install new lighting

That lighting fixture poking from the middle of your bathroom ceiling no longer satisfies today’s standards for sufficient general or ambient light. Consider recessed lighting that bounces off the walls or ceiling instead.

Use sconces to illuminate artwork, mirrors, or decor tucked in alcoves. Choose ones that have sleek designs to complement the room’s overall style. Accent lights should be bright, but their light shouldn’t spill over into other areas.

Ample natural light makes a small bathroom feel large and inviting. Keep windows free of blinds to let in more daylight.

Install a new shower/tub

Reinstalling a new tub and shower can give your bathroom a luxurious feel that visually makes the room feel larger. Using white is a great way to visually expand a space and create tile patterns that blend seamlessly between the walls and ceiling.

Before the demo begins, locate the water shutoffs and turn them off. If the existing valve and tub spout are intact, remove an access panel in an adjacent room to get at the piping .

Set the new surround on the tub flange and nail above it. Use a level to ensure it’s plumb; if not, chisel away or add a shim as needed.

Paint the walls

Painting the walls is one of the easiest ways to give your bathroom a new look. Look for a paint formulated for toilets to be moisture-resistant and mold-free.

Light colors make rooms feel larger when choosing a color, but that doesn’t mean your bathroom renovations need the same shade. A dark accent wall can add depth and interest to your space while still looking cohesive with the rest of the room. Just be sure to tape around anything you don’t want to get paint on, including any trim, such as baseboards or chair rails, wall tile and bath fixtures.

Comments are closed.